Rust Scat Paint Where To Buy

SURFACE PREPARATION: Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials and mildew. Remove any peeling or scaling paint, and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust. Spot prime before and after filling nail holes, cracks, and other surface imperfections. New plaster or masonry surfaces must be allowed to cure (30 days) before applying base coat. Cured plaster should be hard, have a slight sheen and maximum pH of 10; soft, porous or powdery plaster indicates improper cure. Knife off any protrusions and prime plaster before and after applying patching compound. Poured or pre-cast concrete with a very smooth surface should be etched or abraded topromote adhesion, after removing all form release agents and curing compounds. Remove any powder or loose particles. Difficult Substrates: Your dealer offers a variety of specialty primers for use over difficult substrates such as plaster, bleeding woods, grease stains, crayon markings, hard glossy surfaces, galvanized metal or other substrates where paint adhesion or stain suppression is a particular problem. Your dealer can recommend the right problem-solving primer for your special needs.

rust scat paint where to buy

This product is formulated to offer a high quality, durable gloss enamel finish on interior or exterior metal surfaces where a rust preventative coating is needed. The wetting characteristics of this product allow for use on less than ideal surfaces.

This product is formulated to offer a high quality, durable semi-gloss enamel finish on interior or exterior metal surfaces where a rust preventative coating is needed. The wetting characteristics of this product allow for use on less than ideal surfaces.

This is a water reducible Acrylic Metal Primer for coating steel, pre-engineered metal building parts and other steel that is exposed to a normal commercial or residential environment. It may be used in areas where solvent fumes are a problem or where ecological concerns dictate. May be top coated with conventional alkyd, oil based and latex type paints. It may also be used as a tie-coat over zinc rich primers. Provides protection from rust bleed and flash rust. An excellent choice for galvanized metal.

Rust Scat Polyurethane Enamel is a rust-preventative coating that delivers exceptional hardness and durability. Formulated with a urethane-modified alkyd resin, it can be applied to interior or exterior ferrous or non-ferrous metals. (Not intended for use over galvanized metal. Rust Scat Gloss Polyurethane Enamel is formulated to offer a high quality, durable finish on interior or exterior metal surfaces where a rust preventative coating is needed. The wetting characteristics of this product allow for use on less than ideal surfaces.

SURFACE PREPARATION: Surfaces must be clean and free of grease, wax, and mildew. Remove any chalk and loose or scaling paint. If previously coated with cement-base waterproofing paints, clean by sandblasting. Glossy surfaces must be dulled.Primers: New surfaces should be fully primed. Previously painted surfaces should be primed or spot primed as necessary. There are a number of specialty primers available in our family of brands that can be used on difficult substrates such as bleeding woods, hard glossy surfaces, or other substrates where paint adhesion or stain blocking is a problem. Your dealer can recommend the right problem solving primer necessary to meet your needs. 041b061a72